In this lesson
A guitar can need retuning without having a fault. To investigate a persistent problem, compare the same open string before and after playing, using the same tuner and tuning. A chord sounding wrong farther up the neck is a different observation.
Guidance source-checked on 2 November 2026.
Check the reading first
Tune in a quiet place. Play one open string at a time, let it sustain and give the tuner time to read it. If using an amplified signal, use a clean sound without distortion. Check that the tuner is set for your intended tuning; the tuning lesson explains the standard six-string notes.
After tuning all the strings, check them again. On a floating tremolo, string tension and the bridge springs balance each other, so tuning one string can affect the others. Follow the model’s tuning procedure rather than adjusting springs to chase a single reading.
Record what changes
Use this comparison before replacing parts:
- Tune the guitar without a capo. Note the tuner reading for the affected open string as your starting point.
- Play a short passage at your usual strength, then recheck the open strings. Record which string has changed and whether it is sharp or flat. If you normally bend notes or use a tremolo, note whether the change follows that movement.
- Check whether the problem is repeatable on the same string. Write down recent restringing, gauge or tuning changes, travel and changes in room conditions.
- If the open strings remain in tune but fretted notes sound wrong, compare your normal fretting grip with a lighter grip that still gives a clear note. Avoid pulling the string sideways. Read the intonation guide before assuming that the open string has drifted.
The record helps a repairer reproduce the problem. It does not identify a faulty nut, tuner or bridge by itself.
After a restring
New strings can need repeated tuning while they settle. The time varies; nylon strings generally take longer than steel strings. Follow the guitar or string maker’s installation and settling instructions. If stretching is specified, use that method rather than pulling harder or tuning above the intended pitch to speed things up.
Check the installation against the instructions for your exact bridge and tuners. Conventional posts, locking tuners and locking-nut systems need different methods. There is no universal wrap count, knot or tightening procedure. A loose-looking string end alone does not tell you which screw to tighten.
If the string type or gauge also changed, tell the repairer. The change can affect nut fit, neck relief, intonation and a floating bridge’s balance. The string-gauge guide explains what to check before choosing another set.
Look for evidence without making trial adjustments
| What you notice | Useful next step |
|---|---|
| One string changes pitch in a sudden jump while tuning | Record the string and movement. Catching at a contact point is one possibility; ask for an assessment rather than filing or lubricating an unidentified part. |
| Drift begins after bends or tremolo use | Demonstrate it with the usual movement. String installation, contact points and the bridge may need checking together. |
| Strings are visibly corroded, kinked or have damaged windings | Read when strings need replacing. Use the correct replacement and installation method. |
| The open strings stay in tune but notes or chords do not | Check fretting pressure and intonation. A setup assessment may be useful; replacing tuning machines is not established by this symptom. |
Remove a capo for the initial comparison and check again when you fit it for playing. Capo placement or pressure can change pitch. Temperature and humidity changes can also affect the instrument; record the conditions without assuming that every guitar will drift in the same direction.
When to ask a repairer
Book an assessment when repeatable drift interrupts normal playing, you cannot confirm the installation, or something appears loose or damaged. You do not need to buy tuners or make hardware adjustments first. Bring the model, intended tuning, string type/gauge and your before-and-after observations. The setup-assessment guide explains how to describe the problem and discuss the work.
Sources and model-specific help
Fender’s tuner-reading advice covers quiet conditions, a clean signal and allowing the note to sustain. Yamaha’s maintenance article discusses new strings and nut-related catching. PRS’s setup guide separates installation, relief, bridge and intonation checks. Use your own model’s instructions for any mechanical work.